Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Redwood, TX
We provide independent Gelco service throughout Redwood, and the one thing that makes our work here different is what we usually find: builder-grade Gelco fireplaces in post-2000 subdivisions that have never been swept since the day the house was finished. Not heavy creosote, not crumbling old brick. Cracked prefab liners, dislodged dampers and old bird nests. We’re an independent service provider, not affiliated with Gelco, and we handle cleaning, inspection and repair so nothing gets handed off to a second contractor. Call (888) 401-6898 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Redwood Residents Choose Us for Gelco Service
Gelco fireboxes and factory-built flues show up in a lot of Redwood homes, especially in the newer subdivisions where the equipment went in with the house. We know how these units are assembled, where they typically fail, and which repair actually restores safe operation versus which one just postpones the problem.
That matters more than a generic sweep-and-leave. When we open up a Gelco fireplace in Redwood, we’re looking at the flue, the damper, the firebox panels and the clearances to framing all in one visit. If something needs parts, we fit quality components that match the unit, not whatever happens to sit on a hardware store shelf.
Our technicians have up to 12 years of experience, and we work exclusively on chimneys. Not a handyman adding chimney work to a list. Scheduling is simple: a booked sweep, a flat price agreed before we start, and a written report you keep. Gas fireplaces, wood-burning fireboxes, outdoor units, inserts – it’s all chimney work to us, and it all comes down to the same question. Is this safe to burn? Gelco units in Redwood get a straight answer, backed by camera evidence you can see yourself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Redwood
These are the recurring issues we run into with Gelco equipment in Redwood, and each one is shaped by something local – the heat, the housing stock, or how people here actually use a fireplace.
- Cracked prefab flue liners from heat cycling. Central Texas summers sit long and hot, and a Gelco flue that idles for eight or nine months goes through repeated expansion and contraction. Then the first December cold snap arrives and every fireplace lights at once. That pattern cracks liners faster than steady year-round use ever would. A cracked liner is a carbon monoxide path into the house, so it gets caught before it’s a problem.
- Worn damper assemblies that won’t seal. A damper that’s stuck open lets conditioned air escape all summer and lets creosote-laden moisture creep back in through the off-season. In a Redwood home with a Gelco firebox, that’s a draft you notice and a repair you can usually see from the ground.
- Builder-grade clearance violations. Fast-track subdivision construction around Redwood sometimes means a Gelco firebox or flue sitting closer to combustible framing than the listing allows. It’s not visible from the living room. It’s visible during a Level 2 inspection, and it’s exactly the sort of thing an annual check exists to catch.
- Corroded or cracked firebox panels. Trapped moisture and soot acidity eat at firebox panels over time. In newer Redwood homes this often turns up on a first-ever inspection, because nobody’s ever looked inside the unit.
- Chimney swift nests and spring debris. Chimney swifts are protected, they nest in flues through the warm months, and they’re gone by fall. Oak pollen and dust fill the dormant flue each spring on top of that. By the time anyone lights a fire, there’s a partial blockage where the homeowner expected clear air.
Gelco Service in Redwood: What Local Conditions Mean for Your Equipment
Here’s the insight that shapes our work on this page: in Redwood’s post-2000 subdivisions, most Gelco fireplaces are original builder-grade units that have never been swept. So the first service call here frequently uncovers cracked flue components or a bird nest, not heavy creosote alone. That’s a different job than an old-house sweep. It means a Level 2 inspection comes first, because you can’t diagnose a prefab flue by looking up from the firebox and guessing.
The other half of the picture is timing. Creosote that cures and cracks over a long idle summer is one thing. The first blue norther rolling across the Hill Country east of San Antonio is another, because half the neighborhood lights a fire the same week and the phone starts ringing. A homeowner in a newer Redwood subdivision lights their Gelco zero-clearance fireplace on that first cold snap and notices a smoky smell or weak draft. On inspection, a qualified local pro typically finds a cracked flue liner or a dislodged damper from years of skipped maintenance. The fix is usually a Level 2 inspection, creosote removal, and replacement of the damaged prefab components. Book the sweep in October and you’re not the one waiting in December.
Gelco Models & Products We Service in Redwood
We service the Gelco fireplaces that actually appear in Redwood homes: the 36″ Zero-Clearance Wood-Burning Fireplace, the 42″ See-Through Fireplace, the Outdoor Wood Fireplace, and the Gelco Gas Fireplace Insert. Zero-clearance boxes are the ones we see most in subdivision builds. See-through units come out of older custom homes and barndominium-style acreage properties. Outdoor fireplaces live in Central Texas heat and dust. Gas inserts get their own care, because a gas flue still needs to be clean and clear.
For parts, we use OEM or exact-equivalent aftermarket components for Gelco fireboxes and flues. On older units where the components have been discontinued, we evaluate the whole system before recommending anything. Repair only when safety and performance can be fully restored. Otherwise, a modern listed fireplace is the more honest long-term answer.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Redwood
Pricing is set per job by the written estimate. The inspection and the estimate are free. What drives cost is what we actually find: how much creosote is in the flue, whether the liner is intact, whether the damper seals, and whether the firebox needs a cap or panel work. A straightforward sweep on a Gelco unit in good condition sits at the low end. A job that opens up a cracked liner, a clearance violation, or a nest in the flue takes more time and more parts, and the estimate reflects that before any work begins.
What you get with the estimate: a camera inspection, photos of what we found, and a plain explanation of whether it needs doing now or can safely wait. We’ll tell you what we found, what it means, and what it’ll take to fix it. Call (888) 401-6898 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Redwood, TX – Our Local Coverage Area
We serve Redwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Redwood
Yes. A few fires a year still leaves creosote and moisture in the flue, and the idle summer between burns is when it cures and cracks. The annual sweep is also the one time anyone looks at the prefab components for cracks, clearance problems and nests. Skipping it means those problems wait, and they don’t fix themselves. Call (888) 401-6898 for a free estimate.
A Level 2 inspection is a camera-based look at the flue, firebox, clearances and connections, going beyond what a sweep alone shows. Your Gelco fireplace likely needs one if it’s never been inspected, if you’ve noticed a smoky smell or weak draft, or if the unit is original builder-grade equipment in a Redwood subdivision home. It’s how we confirm what’s actually going on before recommending any repair. Call (888) 401-6898 for details on scheduling.
They’re a protected species, and they nest in flues through the warm months, so we clean and remove nests only after they’ve departed in the fall. By the time you light your first fire, the flue can be partly blocked with nest material, which is one reason we don’t assume a draft problem is just creosote. Cleaning around their season is part of how we work in Redwood. Call (888) 401-6898 to book.
Often just the cap. A damaged or missing cap lets rain, birds and debris into the flue, and a proper replacement usually solves that without touching the whole top assembly. If the crown or the flue top has failed, we’ll show you what we found and explain whether a cap alone will do. Call (888) 401-6898 for an assessment.
A smoky smell with no fire usually means a damper that won’t seal, creosote and moisture sitting in an idle flue, or a blockage pushing air back into the room. In a Redwood home with a builder-grade Gelco unit, that’s a common first-visit finding. It’s worth checking rather than living with. Call (888) 401-6898 for a free estimate.
Service Areas Near Redwood
We service Gelco fireplaces in Redwood and the surrounding towns, including New Braunfels, Garden Ridge, Hollywood Park, Cibolo, and Seguin. If you’re in one of these communities and your chimney hasn’t been looked at, that’s the call to make before the season turns. We also cover Hollywood Park and Cibolo, and you can read more about our Redwood service coverage.
Book Your Gelco Service in Redwood Today
Get the sweep booked before the first cold snap fills the schedule. Call (888) 401-6898 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. We’ll inspect the whole system, show you what we found, and give you a written price on the repair.
Written by the team at Beacon Chimney Sweep.