Chimney Repair in Redwood - Inspected on Camera, Then Priced in Writing

Fast, Reliable Chimney Repair Across Redwood

If you’re in Redwood and your fireplace is smoking, smelling, or just hasn’t been looked at since the house was built, we can help. Beacon Chimney Sweep handles chimney repair across Redwood, from liner replacement in the newer subdivisions off the Farm-to-Market roads to crown work on the acreage properties east of town. We know this stretch of the Hill Country, and we know what the houses here actually need. Call (888) 401-6898. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Call (888) 401-6898

Why Redwood Homeowners Call Beacon Chimney Sweep for Chimney Repair

Redwood’s housing stock tells the story before we even get on the roof. Most of the town went up after 2000, which means brick-veneer single-family homes on slab with prefabricated metal fireboxes and factory-built flues. Many owners have treated those fireplaces as maintenance-free since move-in. They aren’t, and the first real inspection usually finds it.

That’s where our three-service model earns its keep. We sweep, we inspect, and we repair, all under one company, so a problem found during an inspection gets fixed by the same team that found it. No second contractor, no subcontracting the fix, no passing you to someone else once the report is written. When we recommend a fix, it’s backed by camera evidence you can see for yourself.

We also source from professional-grade brands – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, Copperfield – rather than whatever a hardware store happens to stock. In a town where the most common failure is a worn prefab flue liner, that material standard matters more than anything else we do. Our technicians have up to 12 years of experience, which in prefab-heavy Redwood country means they’ve seen the same failure pattern many times over.

Chimney Crown Repair in Redwood

Chimney Crown Repair in Redwood usually comes down to one thing: the flat concrete cap on top of a masonry chimney cracking after a hard freeze. Central Texas heat and long dry spells are gentle on crowns. A single hard freeze after a wet spell isn’t. When water gets into a crack, it moves down into the brick, and that’s when you start seeing spalling brick and interior water stains.

A crown repair involves removing the failed top, re-forming the slope so water sheds away from the flue, and sealing it properly. When the crown is cracked but the masonry below is sound, that’s often the whole job. Typical crown repair in Redwood runs $350 to $800 depending on the chimney’s size and how much of the top has to come off. When spalling brick has already started, repointing or rebuilding the top courses adds to the estimate.

When a cracked crown turns into water damage

Water that gets past a cracked crown doesn’t stop at the brick. It finds the flue, the firebox, and eventually the ceiling below. If you’re seeing rust on the damper or white efflorescence on the exterior brick, the crown has been leaking for a while.

Waterproofing after the fix

Once the crown is sound, chimney waterproofing helps keep the masonry from absorbing the next round of freeze-thaw. It’s a breathable treatment, not a sealant that traps moisture inside, and it’s a sensible last step before the season starts.

Chimney Repair Companies in Redwood

Chimney Repair Companies in Redwood serve a market that’s mostly liner and clearance work, not historic masonry restoration. That distinction matters. A contractor who mostly works on hundred-year-old brick chimneys will show up expecting to tuckpoint and instead find a builder-grade prefab firebox with a factory-built flue that’s already past its service life.

The most common repair we quote here is a stainless liner replacement – DuraFlex flexible liner systems for most prefab and insert applications, with correct clearances to framing checked before the new liner goes in. A full liner replacement in Redwood typically runs $1,800 to $4,500 depending on flue length, configuration, and whether the old liner has to be cut out. Tuckpointing on the occasional true masonry chimney runs $600 to $1,500. Chimney rebuilding, when the damage is structural, starts around $3,500 and goes up with height and complexity.

What the inspection actually looks like

A Level 2 inspection with camera is what most Redwood homes need after a few seasons of use. We look at the flue interior, the firebox, the damper, the crown, the flashing, and the clearances to combustibles – then walk you through what we found on the camera, in plain language, no upsell theater.

Flashing and cap work

Flashing repair at the roofline and a properly fitted chimney cap together keep out the two most common intruders in this part of Texas: rain and chimney swifts. The swifts are protected and gone by fall, but the nests they leave behind aren’t.

Trusted Brands We Service in Redwood

We work with an intentional roster of professional-grade chimney brands – DuraFlex and Olympia Chimney for flexible liner systems, HeatShield for flue resurfacing where the existing flue can be restored rather than fully relined, and Gelco, Famco, and Copperfield for the components that finish the job. We don’t claim to keep every part in stock; what we do is source and install from that professional supply chain so the repair outlasts the invoice. In a market dominated by prefab liners and crown work, the material choice is the repair. Turnaround on standard parts is typically quick, and the written estimate you get before any work starts is the price you pay.

Common Chimney Repair Problems We See in Redwood Homes

• Cracked prefab flue liners. Redwood’s builder-grade fireplaces often see a few seasons of hot fires after long dormant summers, and the original factory flue liner doesn’t hold up to that. A damaged liner is a fire and carbon-monoxide path, which is why we replace it rather than patch it.
• Cracked crowns from hard freezes. The exposed masonry crown on any true masonry or acreage chimney is the first thing to fail when a hard freeze follows a wet spell. Once it cracks, water gets into the brick, and spalling follows.
• Clearance-to-combustible violations. Some of the original builder installs in Redwood’s newer subdivisions put the firebox or flue closer to framing than the clearances allow. That’s not a cosmetic issue; it’s a hazard, and it usually surfaces on the first serious inspection.
• Worn dampers and smoke roll-out. A warped damper from prior heat stress will send smoke into the room on the first cold snap. It’s one of the most common first-fire complaints we hear in Redwood, and it’s fixable.

Pricing for Chimney Repair in Redwood, TX

We Also Serve Cities Near Redwood

We cover Redwood and the surrounding towns on this side of the Hill Country: New Braunfels, Garden Ridge, Hollywood Park, and Cibolo. If you’re in one of those and searching for chimney repair, the process is the same – inspection first, camera evidence, then a written estimate. Our Redwood coverage runs across the whole town and the acreage properties east of it, so you shouldn’t have trouble getting on the schedule.

FAQs About Chimney Repair in Redwood