Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Selma, TX
We provide independent DuraFlex service across Selma, TX, and we’re not affiliated with or authorized by the manufacturer. What sets our DuraFlex work in Selma apart is focus: we understand how the prefab chimneys in this town’s newer subdivisions actually age, and we inspect the cap and damper as carefully as the flue itself. If you own a DuraFlex system in Selma, call (888) 401-6898. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 12 years of experience.
Why Selma Residents Choose Us for DuraFlex Service
Selma sits right in the middle of the I-35 corridor between San Antonio and New Braunfels, and the housing here reflects that growth. A lot of it is brick-veneer construction from the 1990s through the 2010s, with factory-built metal fireboxes and short factory chimneys rather than tall masonry stacks. DuraFlex systems are built for exactly that kind of installation, and we’ve spent years learning how they behave in Central Texas heat and humidity.
We work with an intentional roster of professional-grade chimney brands, and DuraFlex is central to that. When we replace a cap or a damper, we use quality parts that fit your flue dimensions and clearances rather than a generic piece that may not match.
Scheduling is straightforward: call, we answer 24/7, and we book your sweep Sunday through Friday. We’re closed Saturday. You’ll get a clear window and a technician who knows what a Selma-area prefab chimney looks like before he opens the firebox door.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Selma
Most of what we find on DuraFlex systems here isn’t heavy soot. It’s the small failures that come from long, hot off-seasons under the Central Texas sun. Here are the issues we handle regularly:
- Rusted or loosened builder-grade caps and spark arrestors. The original caps on many Selma subdivisions are a decade or more old, and humidity plus heat cycling takes a toll. A loosened cap lets water and birds straight into the flue.
- Seized or warped damper assemblies. When a factory-built firebox sits unused for months between occasional ambiance fires, the damper mechanism can seize. It’s a simple part with an outsized effect on how the chimney drafts.
- Creosote glaze from intermittent wood burning. Units sized for steady use end up burning the occasional fire, and that pattern leaves gummy deposits that need proper sweeping before they harden further.
- Cracked or spalling liners and firebox panels. Episodic use can hide damage through an entire winter. We find these on a Level 2 inspection, and they’re why we recommend one on any chimney we haven’t seen before.
- Nests blocking the flue. Birds and wasps love an open chimney that sat idle, and a blocked flue is a carbon monoxide problem waiting to happen. A proper sweep and cap resolves it.
DuraFlex Service in Selma: What Local Conditions Mean for Your Equipment
The 78154 subdivisions are the heart of it. Those 1990s-2010s brick-veneer homes were built with factory-built prefab chimneys, and the original builder-grade cap and damper on those units are now at or past the age where rust and failure are routine. That’s the local reality for DuraFlex owners in Selma: your first failure is usually the cap, not the flue.
That matters most for gas and gas-log units. Even without regular wood fires, an annual inspection keeps warranties and insurance valid, and it’s the only way to catch a cracked liner or a failing damper before it becomes a real hazard. Long summers and the occasional hard freeze push the metal through a lot of expansion and contraction, and water intrusion into an unused flue does the rest. In the newer subdivisions off the I-35 corridor, a spring or fall sweep-and-cap is the common pre-winter call.
DuraFlex Models & Products We Service in Selma
We service the full range of DuraFlex products found in Selma homes: stainless steel flexible relining kits, flexible liner systems, insulation-wrapped liner kits, and direct-vent and prefab fireplace components. Level 2 inspection, cap replacement, and the annual sweep are the sub-services we handle most often on these systems.
Because we’re an independent shop, we choose parts based on what your flue actually needs. Where a genuine DuraFlex cap, damper, or liner component is still available, that’s usually the right call, since mismatched caps and dampers are a frequent cause of repeat problems. A generic aftermarket cap only makes sense when it matches the flue dimensions and clearances exactly. We’re not factory-authorized, and that’s fine. What we bring is hands-on experience with the DuraFlex configuration actually installed in Selma-area houses.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Selma
Costs vary with the condition of the chimney. A straightforward sweep on a short factory flue runs less than a Level 2 inspection, and a cap or damper replacement is priced separately. We don’t quote over the phone without seeing the unit, and we don’t invent numbers.
What a free estimate includes: a look at the cap, damper, and firebox panels, a check of clearances, and a written price for the work before anything begins. We’ll tell you what we found, what it means, and what it’ll take to fix it. If the chimney can safely wait, we’ll say so.
Call (888) 401-6898 for an exact quote. Estimates are free, and we answer 24/7.
Serving Selma, TX – Our Local Coverage Area
We serve Selma and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Selma
Yes, it does. Gas and gas-log units still need an annual inspection to keep warranties and insurance valid, even with no wood fires, and it’s the only way to catch a failing cap, damper, or liner. Call (888) 401-6898 to book yours.
Because the original builder-grade caps on those prefab units are a decade or more old, and Central Texas humidity plus heat cycling rusts and loosens them. A rusted-through cap lets water and birds into the flue. Call (888) 401-6898 and we’ll check yours.
A Level 1 is a visual check of accessible parts. A Level 2 goes further, examining the liner and firebox panels more closely, and it’s what we recommend on any chimney we haven’t serviced before. Call (888) 401-6898 to schedule.
No. Burning it out can send a flaming nest up the flue or block it entirely, and a blocked flue is a carbon monoxide risk. Have it swept and the chimney capped instead. Call (888) 401-6898.
Honest advice on a cracked or spalled firebox or liner is usually replacement rather than patching, because the clearances behind a DuraFlex prefab unit leave no room for improvised repair. Call (888) 401-6898 and we’ll tell you what we see.
Service Areas Near Selma
We serve Selma and the surrounding area, including New Braunfels, Garden Ridge, Redwood, Hollywood Park, Cibolo, and Seguin. We also work in nearby Schertz and Universal City. If you’re not sure whether we cover your street, call and we’ll confirm.
Book Your DuraFlex Service in Selma Today
A clean chimney is a safe chimney, and in Selma that often means a new cap more than a deep sweep. Call (888) 401-6898 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Beacon Chimney Sweep.